Process Precision Instruments
Palghar, Thane, Maharashtra
GST No. 27AAAFP0413C1Z0
TrustSEAL Verified
Call 0794253879879% Response Rate
SEND EMAIL
Product Details:
| Accuracy | +/- 0.25% of reading +/-1 DegreeC |
| Display Resolution | Settable 0.1 / 1 Degree C / DegreeF |
| Input Resistance | 8 MOhm |
| Control Parameters | Sterilization Setpoint,Hysteresis |
| Sensor Input Type | RTD Pt100,3 wire |
| Key Type | 4 Tactile Switches |
| Sterilization Control Mode | Heat Control |
| Operating Temperature | 0 To 55 DegreeC |
| Physical Terminals | Screw Terminals |
Product Details:
| Country of Origin | Made in India |
| Sampling Time | 250mS (4 Samples per Second) |
| Common Mode Rejection | 100 dB |
| Storage Temperature | 10 to +70 DegreeC |
| Operating Temperature | 0 To 55 DegreeC |
| Power Supply Type | Switch Mode |
| Graphic LCD | 160 X 80 STN Monochrome |
Product Details:
| Country of Origin | Made in India |
| Dimensions | 80 (H) X 160 (W) 144 (D) |
| Temperature Input | User Programmable (Common for all 4 Inputs) RTD Pt100, 3 wire DC Linear : 0-20 mA, 4-20 mA, 0-5 V, 0 |
| Pressure Input | User Programmable : 0-20 mA, 4-20 mA, 0-5 V, 0-10 V, 1-5 V |
| Accuracy | RTD Pt100 : +- 0.25% of reading +- 0.1 DegreeC DC Volts/Current : +- 0.25% of reading +- 1 LSD |
| Output | SSR Drive (12 VDC @ 30 mA, Short - Circuit Protected) |
| • | 160 X 80 Monochrome Graphic Display for Comprehensive Process Information |
| • | 4 Universal Temperature Inputs for Control & Mapping |
| • | User Programmable Temperature Measurement Strategy (MAP-1 or Average of MAP-1 to MAP-4 or Min/Max of All Mappings) |
| • | 1 Universal Input (mA / V) for Pressure Indication with Programmable Units (PSI, KG/CM2, BAR & EU) |
| • | Digital Inputs for Door Open & Low Water Level Detection |
| • | Digital Outputs (SSR Drive) for Heating, Air Exhaust Valve and Alarm |
| • | Programmable Sterilization Timer with Setpoints for Timer Pause & Reset |
| • | Programmable Setpoint for Air Exhaust Valve Closing |
| • | Automatic Cycle Abortion at High Temperature Safety Limit & Low Water Level |
| • | Front / Remote Sterilization Cycle Start Command |
| • | F0 Value Calculation & Indication |
| • | Temperature Dependent Cycle Resumption Upon Power Interruption |
| • | In-built Huge Memory for Autoclave Cycle Data Recording with Settable Interval |
| • | 21 CFR Compliance PC Software for Report Generation with User Programmable Company Name/Logo & Footer |
| • | Version Available for Direct Printout of Report on 80/132 Column Dot-Matrix Printer from Controller |